How to Make a SugarPaste Princess Crown--- by Sharon Zambito

When I say Princess, you say Cakes.....

Me: Princess
You: Cakes!
Me: Princess
You: Cakes!

OK, so I get a little excited about cake.

And princess cakes have been a very popular design for a few years now. I have made more than I can count. I get asked quite often how I make the gumpaste crowns, so here are some step by step pictures I took many years ago. The pictures are rather craptastic, due to the fact that I had a craptastic camera at the time, and had no idea how to take a good picture back then. But I think you can get the idea of what I am doing in them. (PS. Craptastic = if crap was fantastic, this would be it)

MAKING A GUMPASTE CROWN:

Paper template:

Cut the metal rim off one end of your can (like a shortening can; I use the gumpaste mix can):

Wrap parchment paper (or wax paper) around your can and tape it in place. The end with the metal lid still on goes down on the counter:

Tape parchment or wax paper down well on counter (you do not need the blue mat under it) and grease it well with shortening:

Roll out gumpaste onto the wax paper and lay the paper template over it and trace over it to cut out the crown shape:

Apply shortening to the surface of the cut out crown with a brush:

Cut the wax paper with a knife along the bottom edge of the crown, and proceed to cut out the rest of a rectangle around the crown. Do not cut out the wax paper along the exact shape of the crown, except along the bottom edge:

Take the can and roll it onto the crown, lining up the base of can with the bottom edge of the crown. The greased side of the crown is sticking to the parchment paper wrapped around the can:

After crown is in place, wrapped all the way around the can, stand it up. Wax paper is still in place on top of the crown:

Gently peel off the wax paper from the top side of the crown. The side of the crown that was face down on the counter, touching the wax paper, is now the upside of the crown and exposed to the air:

Let that sit and dry for 1-2 days. Do not rush it or you will surely break it. (Ask me how I know):

When the crown is dry enough to hold its shape, grab the top of the parchment paper extending above the can and gently slide all of it together off the can:

Sit that on a board and then gently peel the parchment paper off of the inside of the crown:

Let that sit and dry for a few more days. When the crown is really firm you may need to wipe the excess shortening off the inside of the crown, and then dust it with a tad of cornstarch:

When fully dry, you can airbrush or paint it silver or gold. (This photo below is a lie. I was not actually airbrushing it at this time because I had to hold the airbrush with my left hand while my right hand took the picture. Impressive, eh?):

Then you can add plastic craft jewels, or even better, make edible ones!:

Pretty easy but you have to plan a few days ahead at least. Make 2, because if you make only one I guarantee you will break it. (Ask me how I know.) I like to use the Wilton gumpaste mix in the can for these because it not very elastic and rubbery, and that cuts easier than other types I have tried.
Here is a template for the crowns shown above. This is only one half of the crown. And you will have to enlarge this template to the right size for your cake:

Here is another template, the first one I ever made, an older design:

So there you have it! Now go get to making crowns!
Lots of crowns!

All kinds of crowns!
We love Princess cakes!!

________________________________________________

Want to see more of Sharon Zambito's work? Then visit

SugarEd Lagniappe

And to order Sharon's fantastic instructional DVDs and other great decorating supplies, visit

SugarEd Productions

Tutorial and Photos by Sharon Zambito-SugarEd Productions- copyright 2008

This material was used with the permission of Sharon Zambito, SugarEd Productions.

THANK YOU SHARON!!