Sugarpaste Silver Spurs Tutorial

Gray colored firm gumpaste. This really needs to be a very firm paste.

Fondant roller

PME wheel cutter

1 inch daisy cutter

Textured Roller or Impression Mat

Gum Glue ( 1/4 tsp Tylose mixed with 1 tsbp hot water )

Silver and Gold Highlighter Luster Dust

(for decorative use only)

Edible Sugar Lacquer

3" Circle cookie cutter

Roll out gumpaste about 1/8"(*or a bit more) thickness on a well dusted board.( *A bit thicker is better

on the spurs to maintain stability during the drying process.)

Using wheel cutter, cut one using pattern. Flip pattern and cut one more.

Cut one spur using the daisy cutter.

***

Texture your spurs using a textured roller or impression mat. Or find something around your house that

would make an appropriate texture. In this case, I used an ivory cased carving set. It worked great to

make a western style impression.

In this photo, I used a textured rolling pin.

***

Cover the spurs with plastic wrap to protect from drying,

and paint the daisy using gold highlighter.

Uncover and turn the spurs over. Using the white colored portion

of your pattern as a guide, moisten the spurs with gumglue.

Place the daisy at the end and gently press the moistened spurs into the daisy.

Now press the spurs together as shown.

Position the circle cookie cutter on the top of a tall water glass.

Place the spur on the cutter ( as shown) to dry.

If your spurs want to slip, secure lightly with tape.

The firmer the gumpaste, the less likely to move or stretch.

When dry paint the spurs with silver highlighter luster dust and retouch the

daisy if necessary, then

spray with sugar lacquer to set the luster dust.

***

Spur Pattern Below

***


Tutorial and Photography by Jacque Benson
Copyright 2010
This material may not be republished or reproduced in any manner without the expressed permission of the author.